Tippon

Before anyone says it, yes, I know it's shit, and that Microsoft are awful, but my wife needs Office, so I get a couple of accounts with 1TB of storage for free, so I may as well use it.

I've got my PC, my laptop, and a Synology DS216 (I think) NAS that I want to keep synced and backed up. I was using Onedrive on the PC to sync to their online storage, and using Syncthing to keep the laptop and Synology updated, but they just mirrored the PC. The PC was the only one that could write to the folder.

I want to keep the PC and laptop synced in both directions, and use the Synology and Onedrive as extra copies. I know it's not a proper backup, but it's better than nothing for the moment.

Would I be better off installing Onedrive, or Abraunegg's version, on the three systems and letting it sync, or putting Onedrive on the Synology and using Syncthing to keep the folders synced?

I'll have Onedrive on the Synology either way, and I'll be using Syncthing on all three to keep my music synced with my media server, so I'm mostly wondering whether people think it's better to let just the Synology sync to Onedrive, or to have a client on each device.

The three devices are pretty much always used in the same house, but very occasionally the laptop is taken out, almost always to somewhere with an internet connection.

Thanks :)

I've got a Mi 10t Lite 5g that's starting to show its age, and could do with a factory reset to clear some of the crap. Ideally I want to unlock the bootloader and try some custom ROMs too.

It's been years since I did a backup without moving to a new phone, so I don't know the best way to do it anymore. What's the best way these days?

Hi all 🙂

I just wanted to check if this was happening for anyone else before I raise an issue on Github.

I've noticed for a while that Hexbear's emojis were huge, but just assumed that it was some of the random nonsense that they like to do, but then the admin of my instance posted some emojis and confirmed that they should be regular emoji sized.

The thread is here for context:

!https://lemmy.dbzer0.com/comment/16069969

Can someone let me know what size the emojis are for them please? I'm on Android 🙂

EDIT: aeharding, the Voyager developer, has said that they're working on a fix. Thank you for all the replies 🙂

Hi all :)

My wife's broken her phone to the point where it's not holding a charge properly, so I need to replace it. I've been looking at replacements, but I don't know enough about current chipsets to know which ones are decent.

The main things she needs are, decent battery life, an SD card, NFC, and more than 64GB of internal storage. If the OS can be changed in the future to get security updates, that would be a bonus. Given the direction that they seem to be going, with collecting data and locking down the bootloader, I'd prefer to move away from Xiaomi if possible.

The catch is though, we're on a small budget. Thanks to Christmas, we've only got around £200 to £250 to spend. If there's a significant upgrade, we can go to about £300, but that's a stretch.

I've looked at a few phones, and the Nothing phones seem to tick all the boxes, but are right at the top of the budget. The Motorola range looks good, as does the Poco M6 Pro, but like I say, I don't know enough about the chipsets to know if they're any good.

I'm open to any suggestions. Thanks in advance :)

EDIT: I ended up going for the Motorola Moto G85 earlier today. It ticks all the boxes, plus my wife decided to tell me after I'd been looking at lots of different phones that she uses a Motorola in work, and likes the style >.<

Thank you for all the help :)

I put on an episode of a show I'm watching, and about ten minutes into it, I missed something on screen, so pressed the skip back button on my remote. The spinning loading circle came up, but stayed for a while, and the episode froze at the point where I'd pressed the button.

No problem I thought, I haven't used Plex for a while, it might just need a little kick. I restarted my fire stick, and restarted the Plex server, just in case. A few minutes later, I didn't catch what a character said, so I tried skipping back again. Plex crashed again. Another set of restarts and we're watching again.

About 15 minutes later, the episode just freezes. No error message or warning, just a frozen screen. I gave it a minute and pressed play, and Plex crashed back to the episode selection screen. Pressing play worked again for a few minutes, until I got an error on screen telling me that my network is too slow for the video. It's a less than 1080p video streaming at 10 Mbps over a gigabit connection. This time, reopening the video took me back to the point of the last issue.

So much for relaxing in front of the TV...

I've just had an email from Roblox talking about changes to the parental controls. It looks more like they're forcing parents to create accounts, presumably to inflate user numbers going by the news stories two weeks ago.

The email text is below.

'Dear parent,

We’ve been working on a series of important changes that we’ll be making to your child’s account, (account name), next month.

About Roblox accounts with parent privileges Next month, we’re changing the way parents manage their child’s experience on Roblox by introducing Roblox accounts with parent privileges. After linking your account to your child’s, parents can view and update parental controls for their child all from their own device. Parents also get access to insights about their child’s Roblox usage, such as their daily screen time and on-platform friends.

Given these changes, starting next month, parents will no longer be able to set a parent PIN, use Account Restrictions, or receive account-related notifications to their parental email. Instead, you will need to use an account with parent privileges. Existing verified parental emails on child accounts will continue to be used for account recovery. Any settings previously set using a parent PIN will not change, but you will need an account with parent privileges to make updates going forward.

As always, if users are interested in an added layer of security on their account, you can set up 2-factor authentication.

Updated content maturity settings As we shared with the community in July, to help provide parents and users more clarity into the types of content available on Roblox, we’ll soon begin labeling experiences based on the type of content users can expect in an experience, rather than by age. Experience Guidelines will be renamed Content Labels, and you’ll be able to set limits on the type of content accessible to your child through the content maturity setting in parental controls.

New default settings for users under the age of 13 As part of Roblox’s commitment to safety, we are also updating certain default settings for our youngest users. Starting next month, users under the age of 13 will need parent permission to access certain chat features. Users under the age of 9 will also need parent permission to access experiences with content maturity “Moderate,” which may contain things like moderate violence or moderate crude humor.

Your child’s settings will be updated when they reach certain ages, if you and your child haven’t previously made changes to them. You and your child will be notified of these updates in advance.

We will share more information on these setting updates when the changes go into effect next month.

Next steps To continue receiving notifications about your child’s account related to spending or other important activity, you’ll need to set up a Roblox account with parent privileges and link to your child’s account. When these changes take effect, your child will receive a notification inviting them to add a linked parent account, and we’ll send you an email with instructions.

Since day one, Roblox has been committed to building safety features and tools into the design of our products. We will always continue to explore different ways to update our parental controls to make them even more useful for parents.

Roblox'

Reposted. Thanks for the replies about the problem with my last post 🙂

I've got a Linux server running Xubuntu at the moment (It was a media player first), and it also runs two Minecraft servers for the family. It has two network cards that are both connected to the internet. Is there a way to bind the VPN to one of the cards and use the other one for regular use?

I've got Surfshark as my VPN, and it doesn't allow port forwarding under Linux. I've got some software that I want to keep behind the VPN, but the lack of port forwarding is stopping me from sharing the Minecraft servers, and when the VPN is active, it slows down the connection to some of my services like Plex.

I've tried to look it up, but I just don't know enough to get myself anywhere. I've found results that talk about name spaces and routing tables, but they assume a level of knowledge that I just haven't got yet.

I want to use the Arr suite and qBittorrent as the main programs behind the VPN, and Plex, Mylar (a comic manager), Syncthing, and Minecraft as the main programs without it. If I set up qBittorrent and the Arrs as Docker containers, can I use Gluetun to bind just them to the VPN? The VPN is using OpenVPN connections if that makes a difference.

Thanks in advance :)

As some of you may already know, I manage a website and app for a small music festival. It runs on a shoestring budget and helps to support the village I grew up in, so I volunteer my time and resources. Part of this is creating the site and things like posters using resources that I've made.

Recently we had an issue where someone created a logo for us, and after we'd used it for a few years, they claimed it back. It turned out that when they created the logo, neither side thought to draw up any sort of agreement on how it could be used. I want to put something in place that makes it clear that anything that I create for the festival can be used by them forever, but without restricting myself from using it.

My main concern is for the website and app, so that I can use the same structure in the future.

I'm not concerned about the fine print, like saying that I can use this specific text layout or whatever, I just want to stop either side from restricting the other in the event of a major falling out, with the exception of things that are exclusive to one side or the other, like the name of the festival.

What would be the best licence for that please? Thanks in advance :)

Update: I managed to get it working with the answers from @Max_P@lemmy.max-p.me and this link:

https://www.zdnet.com/article/how-to-permanently-mount-a-drive-in-linux-and-why-you-should/

I've just installed Mint 22 on my laptop, and I've got two storage drives alongside my main drive. I want these drives to be available to all users on boot, and to be readable and writable. At the moment they're treated as removable drives, and are mounted under the individual user. As a result, any permissions that I'm setting as the owner are not sticking when they're mounted by another user.

The first drive is synced with my main PC through Syncthing, and is synced to Onedrive from there. The second drive is my music, podcasts, and audiobooks, which are all synced through Syncthing only. I'm the only person using the laptop and accessing any of these files, so I'm not bothered about the wrong user accidentally opening them.

I've read some posts about editing fstab to mount them at startup, but they don't cover whether the drives will be available to other users or not. Can I just add them to fstab and mount them somewhere that's available to all users, then sort out the permissions? If so, where's the best place to put them?

Thanks in advance :)

It turns out that something has been watching the Earth in minute detail since before the solar system was formed, down to a sub molecular level. It can give you the answers to any historical questions, but not things like what someone was thinking or feeling.

All the world's problems have been solved, and the information is only used with the strictest privacy, e.g. you can only get information on living people with their permission, or if you're a member of law enforcement solving a crime.

The question is, if you have a hobby, job, or other reason to research the past, like being a geologist or genealogist, would you take the answers, or would you prefer to do the research yourself?

This might sound daft, but something similar used to work with live discs.

I've got Windows 10 and Mint 21.1 dual booting on my computer at the moment. Every so often I'll realise that I've missed something from my Windows installation. If it's important, I then have to boot to Windows to get the information, or the settings etc.

Is there a way to virtualise my Mint installation so that I can run both the OSs at once to make sure that I've got everything?

VirtualBox had a tool to do this with a live USB, but that was back in the MBR days, so it probably won't work with modern hardware.

EDIT: Sorry, I should clarify, Mint and Windows are on the same physical disk, and the plan is to remove Windows once I'm done.

Update: I'm giving up. It looks like it is possible if you have separate disks with separate boot partitions, but getting it to work with a shared boot partition is harder work than I'm willing to do right now.

VMware Player can use a partition or disk, but might be in read only mode, I couldn't get far enough to check.

Thanks for all the replies :)

I've just finished getting my laptop set up the way I like it, including maximising the RAM and upgrading the screen. I opened it up to use it, and the screws on the hinge tore through the plastic.

To top it off, the plastic on the bottom of the laptop, the side that's been removed here, has also broken.

My wife definitely didn't drop the laptop while she was tidying up though...

EDIT: Apologies all, I'm having trouble with Lemmy today, and it's not letting me reply.

I'll try to reply tomorrow, but in the meantime;

It's a Stonebook branded Clevo n751BU, a 7th gen i5. It's held up respectably well until it appears to have been knocked in the corner where the hinge is. The plastics on both sides of the hinge have given out.

I've ordered a replacement base, but the palm rest which is pictured is not available anywhere that I can find. I'm going to dismantle the hinge to clean and oil it, then reassemble it slightly less tightly, and epoxy the screws into place. The reason for taking it apart in the first place was to add a third hard drive. It has an nvme drive, and I had two HDDs going spare that can hold my documents and music. They're being synced now as I was having problems doing it remotely, but once they're in they can be managed with Syncthing. The laptop shouldn't need to come apart agin afterwards :)

I've been building and repairing computers and laptops for about 30 years, so I'm comfortable with completely stripping it, and can use it as an excuse to give everything a clean again. Short of replacing these HDDs with SSDs, there's nothing else that can physically be upgraded, so I'm half tempted to glue it shut so that I don't get tempted again :D