You could try a bullet connector. They take quite a bit of force to disconnect.
this post was submitted on 01 Oct 2024
9 points (90.9% liked)
Ask Electronics
3288 readers
11 users here now
For questions about component-level electronic circuits, tools and equipment.
Rules
1: Be nice.
2: Be on-topic (eg: Electronic, not electrical).
3: No commercial stuff, buying, selling or valuations.
4: Be safe.
founded 1 year ago
MODERATORS
This seems like a decent suggestion. Also, inexpensive and field repairable.
Depending on how frequently it needs to be connected and how much tension it needs to hold, it might be worth taking a look at some Wago connectors, as i’ve generally been impressed by how well they hold. Not really an option if the connection needs to be regularly connected and disconnected, but if it’s just occasional it could be an option.
Outside of that I would second Aubeynarf’s suggestion, but don’t have much personal experience with them.
XR60 or even 90. So simply larger connectors essentially. The require quiet some force.
It would be a good choice if I had two wires. This is a single wire, so I'd only be using one of the two contacts. So some of the features aren't needed.
So? It is still the cheapest option, extremely reliable, well known, available everywhere, ... For example a connector being certified for aircraft adds not only features you do not need, it also massively increases cost.