3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
How will I assassinate the Shogun now?!
You'll have to use your blowgun. Those are still unregulated.
You jest but automated blowguns with face recognition could be deadly and nearly impossible to spot!
Way ahead of you. Ever load a thumbtack into a piece of 5/16" brake line and give it a puff with your air compressor?
Don't ask me how but the fuckers remain straight in flight. They're cylindrical enough that you could surely make such an apparatus magazine fed.
If you have the compressor, wouldn't it be easier to just use a nail gun with the sensor on the tip disabled?
Not much range on a nailgun. The nails tumble in flight in quite a short distance.
You could probably easily add some fletching to them and maybe a little bit of a barrel to the nail gun to get a little extra muzzle velocity.
Not without breaking the nails off of their strip, at which point you're redesigning the feed mechanism, and at that rate you may as well start from scratch.
Nailguns don't work in the manner like I predict you're thinking of -- you can't add a barrel to one since the nail itself is not fired via the compressed air as a projectile. The air drives a piston which strikes the nail exactly like a hammer. The energy is imparted in the nail in that impact and that's all you get. Adding additional barrel length will not increase the velocity in any way. It may just at the outside increase the flight stability of the projectile very slightly, but nailgun nails aren't very well balanced, they're surprisingly inconsistent, and they're usually not very straight to begin with either.
I used to manage a hardware store. Trust me, myself and my crew have/had a lot of experience with trying to weaponize various tools, parts, and equipment. Boredom on a slow Sunday afternoon will do that for you...
If I recall correctly the ones on the plastic coil can be put back on the coil. I definitely misremembered how nail guns work, it's probably been a decade since I used one with any regularity, and I have made a handful of compressed air blowguns.