181
I mean, if there was more room, it would be indicated with a higher number.
this post was submitted on 16 Jan 2024
181 points (99.5% liked)
PC Master Race
14970 readers
1 users here now
A community for PC Master Race.
Rules:
- No bigotry: Including racism, sexism, homophobia, transphobia, or xenophobia. Code of Conduct.
- Be respectful. Everyone should feel welcome here.
- No NSFW content.
- No Ads / Spamming.
- Be thoughtful and helpful: even with ‘stupid’ questions. The world won’t be made better or worse by snarky comments schooling naive newcomers on Lemmy.
Notes:
- PCMR Community Name - Our Response and the Survey
founded 1 year ago
MODERATORS
"cable management"
I made my graphics card watercooled because I couldn't fit it in my case with the bigass extra long heatsink. It's complicated. I used a universal gpu water block, some small heatsinks for the mosfets and vram and thermal glue to hold the heatsinks on but I fucked up because that fucking glue is like 75% as strong as epoxy. Now that I have an actual proper gpu waterblock, I can't install it because of this shit. I guess the takeaway from this is to not do dumb stuff like I did, so at least you didn't do that.
I bought a case with enough GPU clearance, without realising the radiator for a liquid cooling kit I got was much thicker than standard (Arctic Freezer II), so I had to get a new case for that.
It's good practise to measure everything with measuring tape, I reckon.
I just bought a 420mm AF II and plopped it on top of my case. Problem solved.
My first case didn't even give that option lol. Was a rather odd design. I'm using a Corsair case now and decided to front mount, with fans at the top for exhaust. My room gets a bit hot, probably from all the weed, so when I'm gaming it helps exhaust the air from the GPU.
I didnt say I mounted I "plopped" it on top. It is only attached to not fall off, but it moves. And there is a huge ass hole beside it so the tubes have room to get into the case. Welp, too lazy to get a new case for now so that is how it is going to be.
Please buy a bigger case😂
This is the way.
I’ve usually used a big case so that I don’t need to worry about practical things like this.
Building a computer in a tiny case would be an interesting challenge, but it wouldn’t be very practical or fun in the long term. Designing and building could be fun, but once it’s time to upgrade anything, it’s also the time to sell the whole box and let someone else deal with it.
From what I see or just my personal preference, itx cases seems to be more focused on asthetics than functionality. I do like the looks of it and would like to switch to some open itx builds at some point but idk if it's worth it with all the drawbacks.
Depends what you consider its function. A small case is much more convenient for some people than a hulking mass of steel.
I remember when giant Antec towers were popular. Now people only have NVME drives instead of 3.5" disks, and most modern PCs don't even have optical drives anymore. The biggest thing nowadays is these enormous GPU coolers.
I'd be very nervous about those PSU cables right below the fan...
Nah there's plenty of room, I have a feeling the CPU cooler fans are pointing the wrong way though. Like you can just see the back 'brace' part of the left fan.
Edit: Oh that top case fan is exhausting air before it's really done anything too. OP the air comes out where the brace bits are, try and keep the air moving in one direction, e.g. intakes near the front, exhaust near the back.
Took me a second to see it on the CPU cooler but yeah, looks like they flipped it around, probably due to insufficient RAM clearance, without reorienting the fans.
Also, ideally you want positive pressure inside the case. Like two fans pushing air in and just one pulling air out. This helps with dust build up.
In this instance, the CPU fans are pulling rather than pushing, and yeah it's because of memory clearance.
Surprisingly, temps of the parts aren't that bad. Under load the CPU tops out at about 70c, and the gpu only goes up to 65c while ray tracing and the whole bit.
Still, if money were no object, I'd like to have the Silverstone Sugo 17 shoebox style case when it becomes available.
Those cables won't make any difference to temperature, they're not even that close or clumped up
https://youtu.be/YDCMMf-_ASE?si=FQzig0J3DQrY5WDt
They don't look likely to get buzzed either
haha the GPU I've had before having to RMA it was like this. had about 2mms of space between it and my fans
Apparently it was a total area calculation