I used a Nexus (nxstek.com) for years and it still worked great, only replaced it when I switched to a vertical mouse for wrist ergo, now my wife still uses, and it's the mouse that's lasted her the longest (she's hard as fuck on mice for some reason). I'd suggest you check out the SM-8000B from them.
this post was submitted on 15 Aug 2024
17 points (100.0% liked)
Gaming
30568 readers
254 users here now
From video gaming to card games and stuff in between, if it's gaming you can probably discuss it here!
Please Note: Gaming memes are permitted to be posted on Meme Mondays, but will otherwise be removed in an effort to allow other discussions to take place.
See also Gaming's sister community Tabletop Gaming.
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
Sorry to slightly derail the thread, but I'll probably be on the market for a vertical mouse soon as well, which one do you use / recommend? I've been using Logitech mice for decades now, so I've naturally looked into their options and I'm not quite convinced on the ergonomics of the ones I've seen.
I've been using the Zelotes C-10 (wired for my desktop) and F-17 (wireless for work laptop), when they say vertical, they mean it. Anecdotally, it has helped with my wrist pains. I also wanted the extra buttons on the C-10, so I could map them for gaming (I also use a Razer Tartarus for my left hand for gaming).
I don't use any myself, but my first search turns up a couple options:
Or if you know better place to ask (other than /r/…), I’d be glad.
This is on Reddit, but it has people talking about just buying new mouse switches for arbitrary mice and resoldering them.
https://old.reddit.com/r/MouseReview/comments/11ay2sq/silent_mouse_switches/
I'm not familiar with this, but it sounds like it's practical to just take a mouse, buy new mouse switches, swap them out, as long as you can solder. So if you've got another mouse that does what you want -- and it sounds like you like the Logitech G305 -- you can probably just modify it, if you're willing to put in the effort. I'd read up on this further before going that route.
This post specifically deals with replacing the switches on a Logitech G305 to make it silent:
https://old.reddit.com/r/MouseReview/comments/vi1z4p/how_to_make_a_g305_silent_this_works_for_other/
Additionally, it looks like silent mice are a thing, so you've probably got a number of options out there if you want off-the-shelf.
I can highly recommend this! The switches are very cheap and I love my silent G305. The hardest part was probably the middle click button but you can skip that one if you don't care about it as much. While you're inside, you could clean the scroll wheel which might fix your swelling problem.
Here's the switches: https://www.aliexpress.us/item/3256803887113310.html And the video: https://www.youtube.com/watch?v=VKPUPIjv1kI
I am not very skilled with solder and found it very easy. You don't need anything fancy like a desoldering gun. Just a regular soldering iron with some solder and flux worked for me.
Soldering should be fine, this will probably end up as long winter evening project at some point. Was it possible to re-use gliders after dismembering the mouse?
Swelling problem won't be fixed as easy. The material of the wheel just expanded, the rubber is twice as big as new one to the point it can't fit in its hole in the mouse. Internet is full of the same problems, it was either defective batch or it reacts with some specific agent in some people's sweat. Never the less, the only way is to replace the whole wheel. Need to find out which of my friends have a 3D printer...
It depends on how worn they are. You could probably reused the gliders if you are careful when removing them. I did end up replacing mine though. Here's some replacements: https://www.aliexpress.us/item/3256805149791432.html
Wow that swelling problem is mysterious!
If 3d printing doesn't work out: https://www.aliexpress.us/item/3256807056619542.html?
You could buy any Asus gaming mouse with user replaceable switches and order a bag of Huano silent switches from AE. (if the noise increases or the switch dies just replace the switc+h)
This is not a cheap option, but could potentially endure for a longer time.
It's not easy to find info like the sound of the switch/button with gaming mice.
Maybe the Razer Pro Click, Razer'e answer to the MX Master mice, could work for you.
I have two problems with this.
- I consider Razer the most over-hyped and over-priced peripheral producer. The products I've seen were not bad, but did cost at least twice as much as their feel suggested. I don't want to support this.
- Tilt-wheel. Every mouse I've held that had tilt wheel was PITA in the long run. I probably grip the mouse wrong, but I very often tilted the wheel instead pressing the button.
The last mouse I bought is a Razer. The bottom is an awful dust collector. Never again.
I got a generic office range Logitech and it's super silent