Researchers at the University of Sydney and commercial start-up Dewpoint Innovations have created a nano-engineered polymer coating that not only reflects up to 97% of the sun's rays, but also passively collects water. In tests, it was able to keep indoors up to 6 °C (~11 °F) cooler than the air outside.
That temperature differential results in water vapor condensing on the surface – like the fogging on a cold mirror – producing a steady trickle of droplets.
In trials on the roof of the Sydney Nanoscience Hub, the coating captured dew more than 30% of the year, generating as much as 390 mL of water per square meter (roughly 13 fluid ounces per 10.8 square feet) daily. This might not sound like a lot, but a 12-sq-m (about 129-sq-ft) section of treated roof could produce around 4.7 L (around 1.25 US gallons) of water per day under optimal conditions.
Most houses have a lot more roof than that. "Over an average residential roof," reads the Dewpoint website, "you can expect enough water per day to cover your basic water needs." That's in addition, mind you, to the rainwater you'd be collecting as well, since you do need to have a typical rainwater collection system installed to capture the dew. In Sydney for example, assuming an average annual rainfall around 1 m (3.3 ft), The Tank Factory tells us we could expect to collect somewhere around 6 times more rainwater than condensation - but that equation would certainly look very different in drier areas.
I was thinking more like, does it break the material?
Good question. Sometimes I forget I am not on Reddit talking to a 12 year old.
Yeah, I was thinking this too.
Along with wondering if it can/will need recoating periodically. And what happens to abraded or loose nanoparticles, like do they breakdown into a harmless dust or are we reinventing asbestos-like problems for the future.