this post was submitted on 23 Oct 2025
39 points (100.0% liked)

homeassistant

16698 readers
172 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
39
Thoughts on Philips Hue Lights (midwest.social)
submitted 1 week ago by dumples@midwest.social to c/homeassistant@lemmy.world
53 comments fedilink hide all child comments
 

I am a dabbler in home automation and thinking about starting to get into lighting. I have heard mostly good things about the Philip Hue line and wanted to see what peoples thoughts are about it.

Our main current automation are a large number of Google Smart Speaker and Arlo video doorbells. Everything is working now on the Google ecosystem which I think Philip Hue will connect with. Our house is 100 years old which means that our possibilities to automate are lower than a new home since we have very few overhead lights, power outlets are at a premium (we have lots of power strips running through the house).

We are thinking about doing smart bulbs in some lamps which we can leave on and a chandalier. I think the biggest issue will leaving things always powered on.

you are viewing a single comment's thread
view the rest of the comments
[–] dumples@midwest.social 2 points 1 week ago (2 children)

I am a little concerned about flipping the physical switches that make them useless. I will have to figure out what to do with smart switches for our chandelier

[–] Cptn_Slow@lemmy.world 1 points 1 week ago

I had a couple TP-link wifi switches at my old house and never really ran into problems.

My plan is to implement ZigBee at our new house, but I haven't gotten around to it yet.

[–] SandroWolf@feddit.org 1 points 1 week ago

We just glued the magnetic holding frames the remotes come with next to the wall switch. Also the bulbs are set to stay off when being energised so everybody has to use them.