3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
This came from my Bambu P1S, I did a hotend replacement a week ago and I only print simples models since. This time I tried to print a model a bit more complexe with supports and it failed. Filament is dry, ambiant humidity is 7% in the AMS.
Do you have any suggestions ? Thanks
Did you check preview mode on slicer? Do you use your own settings? Is purge line always that long?
I use factory preset "0.2mm standard" for a 0.4mm hotend. The purge line looks normal to me. I had an other comment with bambustudio and freecad files.
Looking again at your pic and wonder if part tilted while printing due to small area on bed. If it did, adding manual support to the print would help to stabilise as it goes up. Only thing is, that doesn't explain why there is filament on the right of the picture.