3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I've got a textured PEI bed and when I've printed TPU, the adhesion has been perfect, i.e. good enough that the part wasn't going to go anywhere unless I wanted it to, but still easy enough to remove when the print was done and the bed had cooled. I guess it could vary from filament brand to brand, so it's possibly worth trying the same brand as I used, which was cheap Geeetech stuff. It's £8 a roll, and I've used their cheap PLA for ages. I wouldn't recommend their ABS+, though, as it seems to break down at the lowest temperature that gives reasonable layer adhesion.
Yeah you're probably right. Different blends give different results.
Thanks for the filament advice. I try to purchase as locally as possible, but Geeetech is not etched into memory as a no-buy ABS!