3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Adding to what others have said: You can print TPU with Bambulab A1. You just need to feed it directly to the extruder and not through AMS. The generic TPU settings in BambuStudio/Orca should be fine, but make sure to run some tests and slow it down if necessary. If you need supports and have trouble removing them try printing support not in tree mode, but the grid one. They should peel off easily. You should also give PCTG a go if it's readily available where you live. It prints like PETG, but it's stronger and more heat resistant (which you'll need if you want to print a reusable spool)