this post was submitted on 19 Jan 2025
49 points (96.2% liked)

3DPrinting

15989 readers
444 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee
49
Extensive skin contact with PLA and PETG seems okay (lemmy.sdf.org)
submitted 2 days ago by ExtremeDullard@lemmy.sdf.org to c/3dprinting@lemmy.world
29 comments fedilink hide all child comments
 

As you may know, I now wear 3D-printed glasses.

I've been wearing glasses for decades, since age 3, and because I'm lazy, I never take off my glasses even when I sleep, I'm not sure how, but even when I'm asleep, I never turn into a position that would damage my glasses. Decades of habit I guess...

Anyhow, the point is, apart from when I shower and when I go to the swimming pool, those 3D-printed glasses are sitting squarely on my face all day, every day. So probably close to 23.5 hours a day.

And I'm happy to report, PLA and PETG seem to have zero effects on my skin. No rash, no redness, no itching, zero discomfort. I've worn each material for at least 2 months straight and they seem perfectly fine.

I don't see any degradation of either material either, even after being exposed to acidity and oil from my skin for hours on end. I didn't expect PETG to react to anything, since it's more or less the same stuff soda bottles are made of, but I thought maybe PLA would degrade. But it doesn't. Perhaps it degrades slower than I anticipated. I'll report back in a year 🙂

you are viewing a single comment's thread
view the rest of the comments
[–] ExtremeDullard@lemmy.sdf.org 1 points 2 days ago (1 children)

Maybe this would help 🙂

[–] jagged_circle@feddit.nl 2 points 2 days ago* (last edited 2 days ago) (1 children)

I already only use a microfiber cloth (provided with a case by zenni at purchase time), but I normally use water. Why do I need to buy a special fluid?

[–] ExtremeDullard@lemmy.sdf.org 5 points 2 days ago* (last edited 2 days ago) (1 children)

The special fluid isn't strictly needed. It's just water with a few mildly useful ingredients in solution - most importantly a solvent that's safe for plastic glasses. But it's mostly distilled water, so it won't leave stains like hard water would.

If water is good enough for you, then it's enough I guess. Although cleaning the lenses with soap would be preferable to straight water.

The most important thing to avoid scratching your lenses is to resist the temptation to clean them with anything other than a spotlessly clean microfiber cloth and cleaning fluid - or soap and water. Like blowing on them and cleaning them with your shirt: that's guaranteed to scratch them.

And if you have only one microfiber cloth, get more. They get dirty and start scratching lenses too very quickly if you don't clean them regularly. Me, for the price, I just throw them away and get new ones.

[–] jagged_circle@feddit.nl 3 points 2 days ago

Yeah I can't throw cloths away, so probably I should launder my microfiber cloth more frequently