this post was submitted on 18 Jan 2025
15 points (100.0% liked)

3DPrinting

15976 readers
944 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee
15
On multicolor printing, why does the prime tower have to be as high as the current layer? (lemmy.world)
submitted 2 days ago by Trail@lemmy.world to c/3dprinting@lemmy.world
6 comments fedilink hide all child comments
 

Recently bought an A1 mini with AMS, which has been generally great. I have been printing various things, but was thinking if the wasted filament during color changes could be further reduced.

I was wondering, if the color change happens on a high layer, why does the prime tower need to be built as high in order to flush when the color change happens? Is it not a good idea to have the prime tower not generated up until the color change is needed, and then start building it on the plate directly?

This would imply z axis movement whenever the color changes, but is it bad for some reason? It would take slightly more time, but the filament change already takes plenty of time so I assume it is not a factor of the already printed model cooling or so. Could it be something like we want to avoid unnecessary Z axis movements to avoid alignment mistakes maybe with the current layer, if the z movement is not considered precise enough?

Or it is just considered that the aavings of building a shorter tower any not that much comparatively? Anyone more knowledgeable has any thoughts?

you are viewing a single comment's thread
view the rest of the comments
[–] Trail@lemmy.world 2 points 2 days ago

To be honest I haven't tried without it (didn't want to risk the rest of the filament if it would turn out poorly), but I reduce the size to 15mm/15mm or so, plus flushing into infill/supports, and has been ok so far.

I'll try without it sometime when I print for my kid and don't care as much :)