this post was submitted on 07 Nov 2023
1314 points (98.5% liked)

Memes

45729 readers
892 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] CleoTheWizard@lemmy.world 3 points 1 year ago (1 children)

For anyone else who ever has this problem, there are easier ways than a paper clip and hammer.

I have used pencil lead (0.5mm) successfully. You get a short piece and push hard, it might hurt your thumb a bit but it works. Obviously most needles work but I have used things like safety pins from the back of a shirt pin. I’ve also used the tip of mechanical pencils in a pinch. And if you’re crafty you can do something (carefully) with a toothpick and a knife to shave the tip down. Dumbest thing I’ve ever used is a disposable flosser that had a toothpick on the end. I also used that to clean USB C ports. All of these also similarly work on small reset buttons on routers and such.

[–] clearleaf@lemmy.world 1 points 1 year ago

I usually take a needle of some kind and clip the point off so it's not as sharp.