3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Have you tried changing the pi as I suggested before? If the problem still persists, then there could be something wrong with the power supply or your house electricity. Because other than that, the only possibility is its haunted.
I did not, but yesterday I put marlin on the stock board (the first one to start doing the temp thing), and it's doing the same thing, so the pi isn't the problem.
I also tested the printer's power supply with my multimeter and it's stable between 23.8v-24.2v.
My house electricity is a little dodgy, my lights flicker for a half second when a high draw appliance turns on (AC, refrigerator, etc), but nothing in the house has ever been damaged by it in the 5 years I've been here, so I don't think it's strong enough to kill multiple boards, especially since it's after a PSU. I suppose moving forward I can run the printer off a surge protector (I was running straight from the outlet because I was testing power consumption a few months back and never switched it back).
Yeah, that's the thing with electronics. Sometimes the damage is not visible but the component doesn't behave as expected anymore. Timing can be off, more bit flip happens, all sorts of crazy stuff, including a resistor that is not up to spec or damaged ADC. Haunted it is.
So it is.
I've ordered a new board to come in tomorrow. Once installed I'll run the printer exclusively off the surge protector, we'll see if we can't make this board last longer than a week 😉
I had the semi joking idea of designing a breakaway cable that would simply plug and unplug all of my printer peripherals into the motherboard at once. That way, when I break one every week, it's a simple drop and plug process.
Definitely look at it, totally worth doing or pick yourself up one of the tool head pcbs, I can be heavy handed and having to redo wiring bundles every time I want to change something sucks. Molex connector will work really well if you don't go the PCB route.
As for damaging the board just by running it, the btt boards are super resilient, I've totally whoopsied with my octopus pro and shorted a fan header with multimeter and cut a wire I forgot was live on another. I pulled the jumpers on those headers, rest of the board has 0 issue considering the abuse it had thrown at it. I'd be really surprised if slightly dodgy power would damage 2 unrelated boards in a super specific way and damage nothing else.
This is my thinking as well, but I've got zero other ideas.
I've already cut the wires on my heat cart and thermistors, so swapping those parts around is easy.
I've seen printers with a PCB on the hotend, but I'm not sure I understand what it is that the PCB does; is it simply a port hub between the main board and the hotend to make parts easier to swap out, or does it do any actual "thinking"? If it's the former, I think I've more or less accomplished this with the connectors. If it's that latter, I have no idea how I would go about configuring that to work with the SKR, but it would probably solve my problem by moving the "temp calculation" job off of the main board. It would at least tell me for certain if the board is what's reporting the incorrect temp.
The PCB doesn't do anything other than a compacted connector between components. Especially the surface mount component. Also, some devices can be more sensitive than others making it more prone to breaking during mishandling. If something on the pcb breaks (highly unlikely), then you can just solder using jumper wire (to some degree, high speed signals cannot be treated this way). However, if the component on the PCB is the one that breaks, then you can just replace that component with some careful solder works. But yes, sometimes replacing it will be easier than repairing
I use a version of Hartk's Stealthburner PCB on my voron and cludged an afterburner tool head onto my franken mk3s. They're both breakout PCBs, the stealthburner one to my knowledge is passthrough, afterburner one has a thermistor and led on it for chamber temps and a hotend activity led. Totally optional and what you've done already is probably the more frequent things I'd change anyhow. There are fancier tool head boards, they're effectively their own MCUs afaik that communicate via canbus, with those ones you're running very few wires, something I'm thinking about but haven't done yet
For me, they reduced the amount of wiring I needed to run to the hotend and make it super easy to swap components, as I said, I've damaged things unintentionally before (I'll say ADHD is contributing to that) so it's really handy. Keeps the wiring neater as well, or at least gives you a place to manage them.