this post was submitted on 22 Oct 2023
1 points (100.0% liked)

homeassistant

15310 readers
4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
1
Home Assistant Yellow unboxed to bricked in 10 minutes (lemmy.world)
submitted 2 years ago by johnnixon@lemmy.world to c/homeassistant@lemmy.world
3 comments fedilink hide all child comments
 

I bought a Home Assistant Yellow from the Home Assistant people so it would just work. It came with an old software version and demanded an update. 9.x to 10.x went fine. It demanded another update. 10.x to 11.0 and it's bricked. No HTTP. No SSH. No factory reset.

This is disappointing. At least I didn't even have a chance to set anything up, so things work just as well with it dead.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] aodhsishaj@lemmy.world 1 points 2 years ago (1 children)

You might still have console... Which if you get a readout over console you might be able to reflash to eeprom.

https://yellow.home-assistant.io/guides/use-serial-console-linux-macos/

https://yellow.home-assistant.io/guides/flash-cm4-firmware/

Good luck.

[โ€“] johnnixon@lemmy.world 1 points 2 years ago

I had to reimage through serial/USB then the Raspi OS properly downloaded the current image. Thanks for the links getting me in the right neighborhood.